邯郸电动门厂

1、接通电源，控制盒电源指示灯亮。
1, connect the power supply, the control box power indicator light.

2、开门：按“开”键，工作指示灯亮，门体收缩，大门通道自动打开。
2, open the door: press the "open" key, the work indicator light is bright, the door body contracts, and the main entrance opens automatically.

3、关门：按“关”键 ，工作指示灯亮，门体伸展，大门通道自动关闭。
3, close: press the "off" key, the work indicator light is bright, the door body extends, the gate channel automatically closes.

4、手动：遇到停电时，可打开机头箱聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛 门，用专用钥匙插入匙孔，旋转180度，即可转为人工推拉。
4, manual: when a power failure occurs, you can turn on the head door, insert a key into the keyhole with a special key, rotate 180 degrees, and then turn to manual push and pull.

5、遥控:：手持遥控手柄可在控制盒周围10-30米内(根据现场的无线电通讯环境而定)活动控制，按遥控手柄的“开”键，大门自动打开，按“关”键，大门自动关闭。
5, remote control: handheld remote control handle in the control box can be controlled within 10-30 meters around the control box (according to the radio communication environment on the spot). According to the "open" key of the remote control handle, the door opens automatically, and the door is closed automatically according to the "close" key.