| 实木门不开裂方法 |
| 添加时间：2021/10/18 15:14:12 浏览次数： |
| 实木门不开裂方法 Non cracking method of solid wood door 1、 首先是有设置遮雨篷，雨水可以直接淋到门上; 1. First of all, there is a canopy, and the rain can directly pour on the door; 2、 门板涨缩除了受自然环境的影响以外，还与材料本身的变形程度有关; 2. In addition to the influence of the natural environment, the expansion and contraction of the door are also related to the deformation degree of the material itself; 3、 可以采用变形较小的材料，并且控制好材料的含水率; 3. The material with smaller deformation can be used, and the moisture content of the material can be well controlled; 4、 根据当地的自然气候条件，我们生产门扇的木材要进行烘干处理，并且要回潮一周以上，给材料足够的养生期，使材料的含水率稳定在12%左右，然后再开始开料加工。 4. According to the local natural climate conditions, we need to dry the wood for the production of the door leaf, and return to moisture for more than a week, give the material enough curing period, make the moisture content of the material stable at about 12%, and then start the opening processing. 5、 另外生产过程中材料的含水率也要控制好，从开料到半成品直至较交油漆前均需保证材率料不吸潮，含水率不上升。这就需要材料及时放入恒温房以保持木材的含水率不上升。 5. In addition, the moisture content of the material in the production process should also be well controlled. It is necessary to ensure that the moisture content of the material does not absorb moisture and the moisture content does not rise from the opening to the semi-finished product until the paint is handed over. This requires that the material be put into the constant temperature room in time to keep the moisture content of the wood from rising. 6、 在制作工艺上，通过不 化粪池模具 精密铸造 钢纤维 盐水注射机 风电基础模具 nsk轴承经销商 nsk轴承总代理 保定空调移机 同结的的隼接结构，在门结构最重要的地可以变形地方，加入防变形胶条，这样把变形变为最小。6. In the manufacturing process, through the Falcon joint structure with different knots, add anti deformation rubber strip in the most important place where the door structure can be deformed, so as to minimize the deformation |
| 上一页 伸缩门(Retractable door) |
| 下一页 车库门安装注意事项 |
Copyright © 技术支持：遨游网络