邯郸电动门厂

车库门噪音如何消除？噪声是什么原因造成？

How does the noise of the garage door be eliminated? What is the cause of the noise?

遥控车库门被广泛应用在各个行业及场所中，为了能够使车库门能够更好的利于我们使用。我们首先要知道的就是车库门噪音如何消除，噪声是什么原因造成的，有何方法来排除呢？敦化华强自动化科技有限公司卷帘门厂家就来为大家讲解。

Remote control garage doors are widely used in various industries and places, in order to enable garage doors to better facilitate our use. The first thing we need to know is how to eliminate noise from garage doors. What causes the noise? What are the ways to eliminate it? Dunhua Huaqiang Automation Technology Co., Ltd. rolling door manufacturers to explain for you.

1、部件缺油

1, the component is short of oil

在遥控车库门的导轨、平衡系统处和扭簧连接的传动部件少油时，运行的噪音也会很大，故而遥控车库门厂家建议大家要定期给传动部件、导轨添加润滑油，以保证门体的运行顺畅。

When the guideway of the remote control garage door, the balance system and the twisted spring connected transmission parts are less oil, the noise of the operation is also very large. Therefore, the remote control garage door manufacturers suggest that you add lubricating oil to the transmission parts and guide rail regularly to ensure the smooth operation of the door.

2、螺丝松动

2, screw loose

遥控车库门合页、轨道等位置的固定螺丝松动也会造成噪音过大问题的出现，发生车库门噪音这时需要检查车库门固定合页和导轨的螺丝，看其是否出现松动，如有松动，要用老虎钳拧紧。

The fixed screw loosening of the remote control garage door hinge and track will also cause the problem of excessive noise. At this time, the garage door noise needs to check the screw of the garage door fixed hinge and the guide rail, see if it appears loose, if there is loosening, we should tighten it with the tigers tongs.

3、安装不当

3. Improper installation

在安装遥控车库门时，由于没有保持在一个水平位置，一边门板靠近轨道，另一边则是远离导轨，这样以来在车库门门体上升过程中门板上的铰链和导轨之间摩擦力增大，就会产生吱吱的噪音。排除时，可以通过调整车库门两侧导轨来保证车库门门板在两侧导轨正中间，如此便不会产生车库门噪音过大问题了。

In the installation of a remote garage door, as the door plate is close to the track and the other is far away from the track, the creaking noise will occur when the hinges and guideways on the door plate increase in the process of the garage door body rising. By adjusting the guideways on both sides of the garage door, the garage door door can be kept in the middle of the two sides of the guideway so that the noise of the garage door will not be too big.

4、磨损严重

4. Serious wear and tear

车库门运行滚轮上面塑料脱落、损坏、滚轴磨损严重会导致门板倾斜，倾斜后运行噪音也会变大。因此要定期更换运行滚轮，一定要全部更换。

The plastic shedding, damage and roller wear on the roller of the garage door will cause the door plank to tilt, and the noise will also increase after tilting. Therefore, it is necessary to replace the running rollers regularly.