邯郸电动门厂

1

One

清除伸缩门电机及传动链条表面灰尘，并加润滑油；

Remove dust from the surface of the motor and drive chain of the telescopic door, and add lubricating oil.

2

Two

检查控制箱内器件，紧固接线端子，清洁箱内及表面灰尘；

Check and control the device in the box, fasten the terminal, clean the dust in the box and the surface.

3

Three

检查手动开关控制盒，清洁按钮上的污物；

Check the manual switch control box and the dirt on the cleaning button.

4

Four

检查伸缩门上下行程开关，开关滑轨加润滑油；

Check the telescopic door and down stroke switch, the switch slide rail plus the lubricating oil.

5

Five

检查电动刹车手动开关和手动起闸装置；

Check the manual switch of the electric brake and the manual lifting device.

6

Six

手动控制伸缩门，检查运行情况，并调整上下行程开关位置，令伸缩门开启或关闭处于适当的位置，测试过程严防伸缩门冲顶或冲底；

Manually control the telescopic door, check the operation and adjust the position of the upper and lower travel switches, so that the expansion door is opened or closed in an appropriate position, and the test process is strictly against the expansion door or the bottom.